Tag Archives: axle

Axles

The factory YJ axle setup was a reverse-cut Dana 30 up front and a Dana 35 in the rear. Vehicles with a 6-cylinder engine had a 3.07 front, 3.08 rear ring and pinion gear ratio. Vehicles with a 4-cylinder engine had a 4.10 front, 4.11 rear ratio.

[phpbay keywords=”wrangler yj dana (30,35) -(cable,cover,locker,master,pin,posi,ring,seal,shaft,spider,yoke)” num=”100″ siteid=”1″ category=”33726″ customid=”Full Doors” listingtype=”BIN” sortorder=”EndTimeSoonest” itemsperpage=”20″ paging=”true” templatename=”arriviste”]

Differentials

[phpbay keywords=”differential wrangler (87, 88, 89, 90, 91, 92, 93, 94, 95, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, yj)” num=”100″ siteid=”1″ category=”33726″ customid=”Differentials” listingtype=”BIN” sortorder=”EndTimeSoonest” itemsperpage=”20″ paging=”true” templatename=”arriviste”]